Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)
Fenris II (Short Quillon, 440C, Black)

Fenris II (Short Quillon, 440C, Black)

Knife Type: Combat/Hunting
Blade Style: Yagyu Fat Nose, Recurve
Blade Length: Approx 6 1/4 inches (15.9 cm) as measured to center of front bolster
Total Length: Approx 11 inches (27.9 cm)  
Weight: 9.9 oz (283 grams)  
Blade Steel: Böhler 440C High Chromium Martensitic Stainless Steel (Tool Steel)
Hilt/Bolster Material: AISI 304 Austenitic High Nickel, High Chromium Stainless Steel
Blade Grind: Hollow Grind 
Blade Thickness: 4.0 mm 
Blade Finish: Mirror Finish 
Tang: Full Tang, File Work
Ricasso: Yes  
Choil: Yes
Handle Pins: 6 small tactical pins, one mosaic pin
Handle Material: Black Micarta(TM) (or generic equivalent)
Grip Style:  Ergonomic 
Balance Point:  Between the rear of the front bolster and the first set of small pins
Designed by: Modell Design LLC
Sheath: Overseas made embossed heavy duty Loveless style leather sheath. 

Product is a hand made knife.  All measurements and weights approximate

Fenris was one of our original combat knife designs.  The Kukri feel made it extraordinarily appealing to contractors but a number of them, and ex-special forces, requested a shorter blade.  The Fenris II has a shorter blade and revised handle.  It comes both with a standard quillon for proficient knife users and in a version with a long front quillon for added safety.

The knife has front and rear AISI 430 stainless steel bolsters.  The blade is Böhler 440C Tool Steel, professionally tempered to HRC 58. The swage is blunt for added tip strength but there is no guarantee a police officer and/or court won't argue it is sharp.The handle is ergonomically shaped.  It slopes down for added torque but the angle also adds wrist comfort and makes it easier to thrust. Front and rear quillons promote retention.  There is gimping on both sides of the thumb rest.  The decorative file work on both sides of the exposed tang  and in front of the blade-side thumb gimping contributes to handling.  

This knife is available for custom order (you can specify the blade length, handle length, materials, finish, glass breaker or not, etc.).  If you have questions about our inventory or wish to custom order, please e-mail us.

Things to Consider Before Ordering:

1) Check with your local laws to determine the legality of all items ordered. Seller is not responsible for any items seized by customs or other authorities and will not knowingly make shipments to countries where any items are illegal. By placing an order, you are representing that you are an adult, the product(s) ordered are lawful in your local jurisdiction and that you will use the products in compliance with all applicable laws. You accept full responsibility and costs for all customs fees and VAT. Seller will not replace or refund any item confiscated by local authorities or customs agents.

2) These are handmade. There will be slight imperfections on most handmade work commensurate with its pricing. 

3) Plain Language Disclaimer: Knives are inherently dangerous. Glass breakers are also very dangerous to the user and should be used only in cases of life or death and with protective gear. Swords with sharp edges are for display only and should not be used for martial arts training. Even blunt swords are dangerous. You agree that you won't sue the Seller, designer or maker for anything related to using this product for any reason whatsoever and you (and we) really mean it!

4)  Do not store knife in leather sheath long term because the chemicals in leather can corrode/tarnish metal.